Directed Electronics Viper ESP 540 Przewodnik Instalacji Pobierz pdf (Strona 13)

LED and Valet switch

Things to remember when positioning the LED and Valet switch:

• The LED should be visible from both

sides and the rear of the vehicle, if

possible.

• The LED and Valet switch should be at

least 1-1/2" clearance to the rear.

• It is easiest to use a small removable

panel, such as a switch blank or a

dash bezel. Remove it before drilling

your 5/16" hole.

IImmppoorrttaanntt!!

NNoott

use a step drill bit (unibit) for drilling the

5/16” hole. It is recommended to use a 5/16” drill bit. Use

care to ensure the hole is drilled straight. Drilling at an angle

can cause product malfunction.

Starter kill relay

If the Starter Kill Relay or it’s connections are immediately visible upon

removal of the underdash panel, they can easily be bypassed.

Always make the relay and its connections difficult to notice from the

factory wiring. Exposed yellow butt connectors do not look like factory

parts, and will not fool anyone. For this reason, routing the starter kill

wires away from the steering column is recommended.

N3001L_2009-04print.qxd 5/12/2009 11:14 AM Page 7

25-Mar-10

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 177 178

Brak uwag

Directed Electronics Viper ESP 540 Przewodnik Instalacji Strona 13