Directed Electronics Automate 210D Instrukcje Operacyjne Pobierz pdf (Strona 131)

Over/Under Checkweighing with Additional Requirements

Changing the Tolerance Limits

You can individually define the tolerance limits to be between 0.1% and 10%.

Tolerance limits Code

+/– 0.1% over/under deviation from the target 4 1 1

+/– 0.2% over/under deviation from the target 4 1 2

+/– 0.5% over/under deviation from the target 4 1 3

+/– 1.0% over/under deviation from the target 4 1 4*

+/– 1.5% over/under deviation from the target 4 1 5

+/– 2.0% over/under deviation from the target 4 1 6

+/– 2.5% over/under deviation from the target 4 1 7

+/– 3.0% over/under deviation from the target 4 1 8

+/– 5.0% over/under deviation from the target 4 1 9

+/– 10.0% over/under deviation from the target 4 1 10

Automatic Data Output

“Acceptable” values can be printed out or transferred automatically.

Data are output once the readout has stabilized within the tolerance limits selected.

Following data output, this function is blocked until the balance is unloaded to the

extent that the weight on the pan is below the lower threshold limit, or is loaded

so that the weight exceeds the upper threshold limit. The lower weight limit

is approx. 30% and the upper weight limit is approx.170% of the target weight.

Automatic output of “acceptable” values Code

On 4 2 1

Off * 4 2 2

* = factory setting

3–53

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 187 188

Brak uwag

Directed Electronics Automate 210D Instrukcje Operacyjne Strona 131